REVISED ENGINE OIL DRAIN PLUG TORQUE INFORMATION

VEHICLES AFFECTED: 1984 'J' Cars and S/T 10/15 series Trucks Equipped With 2.0L Engines (Codes B, P, Y)

The drain plug washer for the 2.0L engine has been changed from nylon to copper. The torque specification has been increased in order to ensure proper sealing.

Old Specification New Specification (Nylon Washers) (Copper Washers)

20 to 27 N-m 41 to 51 N-m 15 to 20 Ft-Lbs 30 to 38 Ft-Lbs

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.