Rear Seat Replacement 2 Door

Important: Remove the passenger side seat before removing the driver side seat.

1. Remove the seat leg and the hinge covers. Refer to Seat Leg and Hinge Cover Replacement.



2. Tilt the seat slightly forward in order to remove the seat leg nuts.
3. Fold the seat in order to remove the rear seat nuts.
4. Remove the seat from the vehicle.

1. Install the seat to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Fold the seat back forward in order to install the seat leg nuts.

Tighten
Tighten the nuts to 80 N·m (59 lb ft).

3. Install the seat rear nuts.

Tighten
Tighten the nuts to 80 N·m (59 lb ft).

4. Install the seat leg and the hinge covers. Refer to Seat Leg and Hinge Cover Replacement.

Rear Seat Replacement 4 Door

Important: Remove the passenger side rear seat before removing the driver side rear seat.

1. Remove the seat leg and the hinge covers. Refer to Seat Leg and Hinge Cover Replacement.



2. Tilt the seat slightly forward in order to remove the seat leg nuts.
3. Fold the seat in order to remove the rear seat nuts.
4. Remove the seat from the vehicle.

1. Install the seat to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Fold the seat back forward in order to install the seat leg nuts.

Tighten
Tighten the nuts to 80 N·m (59 lb ft).

3. Install the seat rear nuts.

Tighten
Tighten the nuts to 80 N·m (59 lb ft).

4. Install the seat leg and the hinge covers. Refer to Seat Leg and Hinge Cover Replacement.