Removal Procedure
Important: If you must remove more than one tube adapter at one time, stamp the
BPMV with a number (1, 2 or 3) in order to indicate the number of grooves
cut into the tube adapters. This procedure will aid proper reassembly.
- Remove the appropriate
brake line from the tube adapter (1).
- Remove the tube adapter from the BPMV (3).
Installation Procedure
- Install the new gasket
(2) on the tube adapter (1).
- Install the new tube adapter
(1) into the BPMV (3).
Tighten
Tighten the tube adapter to 31 N·m (23 lb ft).
- Install the brake line.
Tighten
Tighten the brake line to 29 N·m (22 lb ft).
- Bleed the system. Refer to
Antilock Brake System Automated Bleed Procedure
.