Removal Procedure
- Remove the instrument
panel accessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
in
Instrument Panel, Gauges and Console.
- Remove the control assembly retaining screws.
- Depress the control assembly retaining tabs and remove the control
assembly from the instrument panel.
- Disconnect the electrical connectors from the control assembly.
- Remove the control assembly bulb from the control assembly and
retain.
Installation Procedure
- Install the control assembly bulb to the control assembly.
- Connect the electrical
connectors to the control assembly.
- Install the control assembly into the instrument panel, ensuring
that the control assembly retaining tabs lock into place.
- Install the control assembly retaining screws.
- Install the instrument panel accessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
in Instrument Panel,
Gauges and Console.