GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Jimmy - 4WD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Door Inside Handle Replacement

Removal Procedure
  1. Open the endgate.
  2. Remove the screws that retain the endgate inside handle to the endgate.

    3. Object Number: 745 Size: SH
  3. Remove the endgate inside handle from the vehicle.

Installation Procedure

    Object Number: 745 Size: SH
  1. Install the endgate inside handle to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws that retain the endgate inside handle to the endgate.

    3. Tighten
    Tighten the screws to 2.8 N·m (25 lb in).