Subject: | Driver/Passenger Seat Adjuster Switch Bezel at Seat Will Not Stay Fastened (Replace Seat Adjuster Switch Bezel) |
Models: | 1998-99 Chevrolet and GMC S/T Utility Models |
1998-99 Oldsmobile Bravada |
With 8-Way Power Front Seats (RPO's AN3, AG0, AH8) |
Some owners may comment that the driver/passenger seat adjuster switch bezel will not stay snapped in place.
A new seat adjuster switch bezel has been developed to correct this condition. This new bezel has added screw attachments that should improve retention. Replace the seat adjuster switch bezel on affected vehicles. Use the following service procedure and the appropriate part number listed below. Also replace the seat adjuster switch bezel on the opposite seat.
Important: The new bezel will fit on the seat using both the fasteners and the screws around the heat/lumbar switch. The hole located at the recliner area of the bezel will remain empty. Do not attempt to install a screw at that location.
P/N | Description | Color/RPO Code | Qty |
---|---|---|---|
12476124 | Bezel, P/Seat Adj Switch | Pewter/92I | 1 |
12476125 | Bezel, P/Seat Adj Switch | Graphite/12I | 1 |
12476126 | Bezel, P/Seat Adj Switch | Beige/64I | 1 |
12476127 | Bezel, D/Seat Adj Switch | Graphite/12I | 1 |
12476128 | Bezel, D/Seat Adj Switch | Beige/64I | 1 |
12476129 | Bezel, D/Seat Adj Switch | Pewter/92I | 1 |
12476130 | Bezel, D/Seat Adj Switch (Memory) | Graphite/12I | 1 |
12476131 | Bezel, D/Seat Adj Switch (Memory) | Pewter/92I | 1 |
12476133 | Bezel, P/Seat Adj Switch (Memory) | Graphite/12I | 1 |
12476134 | Bezel, P/Seat Adj Switch (Memory) | Beige/64I | 1 |
12476713 | Bezel, D/Seat Adj Switch (Memory) | Beige/64I | 1 |
12532233 | Bolt, Seat | - | 2 |
Parts are currently available from GMSPO.
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
---|---|---|
C6554 | Panel, Frt Seat Cushion Outer Finish (Bezel) - Replace (Right) | 0.2 hr |
C6555 | Panel, Frt Seat Cushion Outer Finish (Bezel) - Replace (Left) | 0.2 hr |