Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Check for an open RR WPR fuse in the IP Fuse Block. Was an open fuse found? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the open fuse. Is the replacement complete? | -- | Go to Step 13 | -- |
4 |
Is the test light on? | -- | Go to Step 5 | Go to Step 8 |
5 | Check for a poor connection at the rear washer pump connector. Is a poor connection present? | -- | Go to Step 6 | Go to Step 7 |
6 | Repair the poor connection. Is the repair complete? | -- | Go to Step 13 | -- |
7 | Replace the rear washer pump. Refer to Washer Pump/Reservoir Replacement Is the replacement complete? | -- | Go to Step 13 | -- |
8 |
Is the test light on? | -- | Go to Step 9 | Go to Step 10 |
9 | Repair the open in CKT 350. Is the repair complete? | -- | Go to Step 13 | -- |
10 | Check for a poor connection or an open in CKTs 43 and 392. Is a poor connection or an open present? | -- | Go to Step 11 | Go to Step 12 |
11 | Repair poor connection or the open in CKT 43 or 392. Is the repair complete? | -- | Go to Step 13 | -- |
12 | Replace the rear wiper/washer switch. Refer to Wipers/Washer Switch Replacement - Rear. Is the replacement complete? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Symptoms |
