Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: This table applies to the rear seat audio module only. | ||||
1 | Did you review the radio/audio system operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify that the radio illumination is inoperative with the park lamps on. Does the radio illumination operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Inspect the PARK LPS fuse 5 for an open. Is the fuse open? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair the short to ground in CKT 2409 (BRN). Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Replace the PARK LPS fuse 5. Is the repair complete? | -- | Go to Step 8 | -- |
5 |
Is voltage present in CKT 2409 (BRN)? | 9-16 V | Go to Step 7 | Go to Step 6 |
6 | Repair the open or high resistance in CKT 2409 (BRN). Refer to Circuit Testing and Wiring Repairs in Wiring Systems. If ok, replace the headlamp switch. Refer to Headlamp Switch Replacement Is the repair complete? | -- | Go to Step 8 | -- |
7 | Replace the rear seat audio module. Refer to Rear Seat Audio Control Replacement . Is the replacement complete? | -- | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
