GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2000 🢒 Jimmy - 4WD 🢒 Body and Accessories 🢒 Horns 🢒 Horn Replacement - Left Side

Removal Procedure

    Object Number: 392793 Size: SH
  1. Remove the windshield washer solvent container. Refer to Washer Pump/Reservoir Replacement .
  2. Disconnect the electrical connector from the horn.

    3. Object Number: 392795 Size: SH
  3. Remove the bolt that retains the horn to the inner fender.
  4. Remove the horn from the inner fender.

Installation Procedure

    Object Number: 392795 Size: SH
  1. Install the horn to the inner fender.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolt that retains the horn to the inner fender.

    3. Tighten
    Tighten the bolt to 17 N·m (13 lb ft).


    Object Number: 392793 Size: SH
  3. Connect the electrical connector to the horn.
  4. Install the windshield washer solvent container. Refer to Washer Pump/Reservoir Replacement .