GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform the Power Door Systems Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Power Door Systems

2

Verify that the LF power window is inoperative.

Do the power windows operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

3

  1. Disconnect the LH side window regulator motor.
  2. Turn the ignition switch to the RUN position.
  3. Connect a digital multimeter (DMM) between terminal A and terminal B of the LH side window regulator motor connector.
  4. Operate the LH side window regulator switch in the UP/DOWN positions.
  5. Test for voltage. Refer to Circuit Testing in wiring systems.

Is battery voltage present?

B+

Go to Step 7

Go to Step 4

4

Test CKT'S 164 (DK BLU) and 165 (BRN) for an open. Refer to Circuit Testing in wiring systems.

Was an open present.

--

Go to Step 5

Go to Step 6

5

Repair the open in the appropriate circuit. Refer to Wiring Repairs in wiring systems.

Is the repair complete?

--

Go to Step 8

--

6

Replace the LH door lock and side window switch. Refer to Front Side Door Window Switch Replacement .

Is the repair complete?

--

Go to Step 8

--

7

Replace the LH side window regulator motor. Refer to Power Window Motor Replacement .

Is the repair complete?

--

Go to Step 8

--

8

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3