GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

DEFINITION: The lock system does not allow the key to rotate out of the OFF position.

1

Did you review the Steering Wheel and Column - Standard Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Steering Wheel and Column - Standard

2

Verify that the lock system does not unlock.

Does the lock system operate normally?

System OK

Go to Step 3

3

Inspect for an incorrect, worn, or damaged key.

Is the key incorrect, worn, or damaged?

Go to Step 7

Go to Step 4

4

Inspect for a faulty lock cylinder.

Is the lock cylinder damaged?

Go to Step 8

Go to Step 5

5

Inspect the lock module assembly for looseness.

Is the lock module assembly loose?

Go to Step 9

Go to Step 6

6

Inspect the ignition switch assembly for damage.

Is the ignition switch assembly damaged?

Go to Step 10

Go to Step 3

7

Replace the key. Refer to Key and Lock Cylinder Coding in General Information.

Did you complete the repair?

Go to Step 11

--

8

Replace the lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .

Did you complete the repair?

Go to Step 11

--

9

Tighten the lock module assembly. Refer to Fastener Tightening Specifications .

Did you complete the repair?

Go to Step 11

--

10

Replace the ignition switch. Refer to Ignition Switch Replacement - On Vehicle .

Did you complete the repair?

Go to Step 11

--

11

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3