Electric Park Lock Module - Disassemble - Off Vehicle Floor Shift
Tools Required
• | J 41352 Modular
Column Holding Fixture |
• | J 42640 Steering
Column Anti Rotation Pin |
- Put the steering column
and J 41352
into a vise.
- Insert J 42640
into the lower trim cover.
- Use a small screwdriver
to pull the filler plug out of the bottom of the lower trim cover.
- Insert the small screwdriver
into the filler plug hole in the bottom of the lower trim cover.
- Use the screwdriver to push up on the manual override of the electric
park lock (1).
- Insert the key into the ignition.
- Turn the key to the LOCK position. Remove the key.
- Remove the 2 pan
head tapping screws (1) from the lower trim cover (2).
- Remove the lower trim
cover from the upper trim cover in the following way:
9.1. | Tilt the lower trim cover down. |
9.2. | Slide the lower trim cover backward in order to disengage the
locking tabs. |
- Remove the 2 TORX®
head screws (1) from the upper trim cover (2).
- Remove the upper trim cover (2) from the steering column.
- Remove the black connector (2)
from the electric park lock (1).
- Pry the electric park
lock (2) off of the electronic lock module assembly (1).