Automatic Transmission Shift Lock Control Assemble - Off Vehicle Column Shift

1. Put the shift lever clevis into the NEUTRAL position.
2. Firmly install the automatic transmission shift lock control onto the steering column jacket assembly and the cable shift cam assembly.



3. Adjust the automatic transmission shift lock control in the following way:

3.1.	Pull out the tab (1) on the adjuster block side (2) of the automatic transmission shift lock control.

3.2.	Press on the adjuster block (2) to compress the internal adjuster spring which disengages the adjuster teeth. Slide the adjuster block (2) as far away from the solenoid as possible.

3.3.	Lock the adjuster block (2) in place by pushing in on the tab (1).

4. Inspect the automatic transmission shift lock control for the following items:

4.1.	The automatic transmission shift lock control must lock the shift lever clevis when the shift lever clevis is put into the PARK position.

Once the steering column is installed in the vehicle, the gear shift lever must remain in the PARK position unless the brake pedal is depressed.

4.2.	The solenoid will be energized.

4.3.	Readjust the automatic transmission shift lock control if needed.

5. Install the upper and lower trim covers. Refer to Trim Covers, Shift Lever Seal - Assemble - Off Vehicle .