Removal Procedure
- Remove the front mat and carpet. Refer to
Front Floor Mat/Carpet Replacement
in Instrument Panel, Gauges,
and Console.
- Remove the console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gauges, and Console.
- Ensure that the transmission is in the mechanical neutral position.
- Remove the retainer securing
the shift cable to the shift controller.
- Remove the tape and grommet
on the shift cable from the floor panel.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the retainer from
the shift cable and transmission bracket.
- Remove the shift cable end from the transmission shift lever stud
ball.
- Remove the cable from the vehicle.
Installation Procedure
- Ensure that the transmission is in the mechanical neutral position.
- Following the shift cable
adjustment procedure, install the shift cable end of the shift cable to the
transmission shift lever stud ball. Refer to
Shift Cable Adjustment
.
- Install the retainer to the shift cable and transmission bracket.
- Feed the shift cable through the floor panel.
- Lower the vehicle.
- Install the tape and grommet
on the shift cable to the floor panel.
- Install the retainer securing
the shift cable to the shift controller.
- Install the console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gauges, and Console.
- Install the front mat and carpet. Refer to
Front Floor Mat/Carpet Replacement
in Instrument Panel, Gauges,
and Console.