Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Interior Lights Schematics | |||
1 | Did you perform the Lighting Systems Diagnostic System Check? | Go to Step 2 | |
2 | Verify that the underhood lamp is inoperative. Does the underhood lamp operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Inspect the bulb for an open filament or poor terminal contact. Was a problem found? | Go to Step 6 | Go to Step 4 |
4 | Test the inadvertent power courtesy lamps supply voltage circuit for an open, high resistance or short to ground. Refer to Circuit Testing in Wiring Systems. Was a problem found? | Go to Step 5 | Go to Step 7 |
5 | Repair the open, high resistance or short to ground in the inadvertent power courtesy lamps supply voltage circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 8 | -- |
6 | Replace the bulb or repair the socket. refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 8 | -- |
7 | Replace the underhood lamp assembly. Refer to Underhood Lamp Replacement . Did you complete the repair? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |