Removal Procedure
- Open the glove box to expose the glove
box retaining tab (1).
- Lift the retaining tab and allow the glove box to hang freely.
- Using a suitable flat-bladed tool, release
the plastic retainer that retains the hazard/ turn signal flasher (1) to the
C203 body harness connector (2) .
- Remove the hazard/ turn signal flasher (1).
Installation Procedure
- Install the hazard/ turn signal flasher
(1) to the C203 body harness connector (2).
- Install the plastic retainer and ensure the hazard/ turn signal
flasher will not work its way loose over time.
- Lift the glove box retaining tab (1)
to install the glove box to its original position.
- Close the glove box.