Tools Required
J 34940 Rivet Gun
Removal Procedure
Important: The rear door power window motor and regulator replacement parts are
sold as an assembly. Do not attempt to separate the motor from the regulator
before verifying that separate replacement parts are available.
- Remove the window. Refer to
Rear Side Door Window Replacement
.
- Disconnect the power window motor electrical connector, if equipped.
- Remove the electrical harness retainers, if equipped.
- Drill out the rivets that
secure the window regulator to the door.
- Remove the window regulator and the motor assembly (power windows
only) from the door.
Installation Procedure
- Install the window regulator
and the motor assembly (power windows only) to the door.
- Install the rivets that secure the window regulator to the door
using J 34940
.
- Install the electrical harness retainers, if equipped.
- Install the power window motor electrical connector, if equipped.
- Install the window. Refer to
Rear Side Door Window Replacement
.