Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Heated Seats Schematics | |||
1 | Did you perform the Diagnostic System Check? | Go to Step 2 | |
2 | Operate the heated seats. Does the system operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Is the inoperative heated seat on the passengers side? | Go to Step 4 | Go to Step 6 |
4 |
Did the test lamp illuminate? | Go to Step 5 | Go to Step 6 |
5 |
Is continuity present across the seat belt switch connector with the seat belt buckle inserted into the seat belt latch? | Go to Step 19 | Go to Step 18 |
6 |
Did the test lamp illuminate? | Go to Step 7 | Go to Step 14 |
7 | Connect a test lamp between the ground circuit at the heated seat switch connector and battery positive voltage. Did the test lamp illuminate? | Go to Step 8 | Go to Step 15 |
8 |
Did the test lamp illuminate? | Go to Step 9 | Go to Step 11 |
9 | Connect a test lamp between the battery positive voltage circuit at the seat heater module connector and a good ground. Did the test lamp illuminate? | Go to Step 10 | Go to Step 16 |
10 | Connect a test lamp between the ground circuit at the heated seat element connector and battery positive voltage. Did the test lamp illuminate? | Go to Step 13 | Go to Step 17 |
11 | Test the heated seat switch signal circuit for a open, high resistance or a short to ground. Did you find and correct the condition? | Go to Step 22 | Go to Step 12 |
12 | Inspect for poor connections at the harness connector of the inoperative heated seat switch. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. Did you find and correct the condition? | Go to Step 22 | Go to Step 21 |
13 | Inspect for poor connections at the harness connector of the inoperative seat heater module. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. Did you find and correct the condition? | Go to Step 22 | Go to Step 20 |
14 | Repair the open or short to ground in the ignition 3 voltage circuit to the inoperative heated seat switch. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 22 | -- |
15 | Repair the open in the ground circuit at the inoperative heated seat switch. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 22 | -- |
16 | Repair the open or short to ground in the battery positive voltage circuit at the inoperative seat heater module. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 22 | -- |
17 | Repair the open in the ground circuit at the inoperative seat heater module. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 22 | -- |
18 | Repair the short to ground in the seat belt switch signal circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 22 | -- |
19 | Replace the seat belt switch. Did you complete the replacement? | Go to Step 22 | -- |
20 | Replace the inoperative seat heater module. Did you complete the replacement? | Go to Step 22 | -- |
21 | Replace the inoperative heated seat switch. Did you complete the replacement? | Go to Step 22 | -- |
22 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
