GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the head restraint, if equipped, from the seat back. Refer to Front Seat Head Restraint Replacement .
  2. Remove the EZ entry release handle, if equipped, from the seat back. Refer to EZ Entry Seat Manual Release Knob Replacement .

  3. Object Number: 298942  Size: SH
  4. Separate the J-strip at the base of the seat back.
  5. Remove the seat cover from the pad by sliding the cover upward off the seat back.

  6. Object Number: 619745  Size: SH
  7. Remove the seat back cardboard by unhooking the plastic clips from the lumber support.

  8. Object Number: 619746  Size: SH
  9. Separate the seat back pad from the seat back frame.

Installation Procedure


    Object Number: 619746  Size: SH
  1. Install the seat back pad onto the seat back frame.

  2. Object Number: 619745  Size: SH
  3. Install the seat back cardboard to the seat by hooking the plastic clips onto the lumbar support.
  4. Pull the seat cover over the entire seat back.

  5. Object Number: 298942  Size: SH
  6. Engage the J-strip at the base of the seat back.
  7. Install the head restraint to the seat back. Refer to Front Seat Head Restraint Replacement .