Removal Procedure
- Remove the endgate window latch. Refer to
Endgate Window Latch Replacement
.
- Disconnect the electrical connectors as needed.
- Mark the location of the endgate window latch support in order to ensure proper alignment during installation.
- Remove the bolts that retain the endgate window latch support to the liftgate.
- Remove the endgate window latch support from the endgate.
Installation Procedure
- Install the endgate window latch support.
- Align the marks made during disassembly.
- Connect the electrical connectors as needed.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the bolts that retain the endgate window latch support to the liftgate.
Tighten
Tighten the bolts to 9 N·m (80 lb in).
- Connect the electrical connectors as needed.
- Install the endgate window latch. Refer to
Endgate Window Latch Replacement
.