Removal Procedure
- Open the sunroof until
the wind deflector springs are exposed.
- Remove the sunroof. Refer to
Sunroof Replacement
.
- Drill out the rivets that secure the wind deflector springs to
the sunroof assembly.
- Remove the wind deflector springs.
- Remove the wind deflector from the sunroof assembly.
Installation Procedure
- Install the wind deflector to the sunroof assembly.
- Install the wind deflector
springs.
Ensure that the wind deflector springs are installed
on the correct side of the sunroof. The lower section of the notch at the
rear of the spring must be on the outboard side of the sunroof assembly.
- Install the rivets that secure the wind deflector springs to the
sunroof assembly.
- Install the sunroof. Refer to
Sunroof Replacement
.
Ensure that the tabs at the front of
the wind deflector are tucked under the front edge of the roof opening.
- Close the sunroof.