GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2001
🢒
Jimmy - 4WD
🢒
Preface
🢒
Cautions and Notices
🢒 Trim Covers, Shift Lever Seal - Disassemble - Off Vehicle
Trim Covers, Shift Lever Seal - Disassemble - Off Vehicle Column Shift
Tools Required
•
J 41352
Modular Column Holding Fixture
•
J 42640
Steering Column Anti Rotation Pin
Put the steering column and
J 41352
into a vise.
Insert
J 42640
into the lower trim cover of the steering column.
Inspect the steering column for accident damage. Refer to
Inflatable Restraint Coil Centering - Off Vehicle
.
Remove the tilt lever.
Remove the 2 pan head tapping screws (1) from the lower trim cover (2).
Remove the lower trim cover from the upper trim cover.
Tilt the lower trim cover down.
Slide the lower trim cover backward in order to disengage the locking tabs.
Slide the shift lever seal (2) up the shift lever (4).
Remove the shift lever screw (3) from the shift lever assembly (4).
Remove the shift lever assembly (4) from the shift lever seal (2).
Remove the shift lever seal (2) from the shift lever (4).
Remove the trim cover protector (1) from the lower trim cover (2).
Remove the 2 TORX® head screws (1) from the upper trim cover (2).
Remove the upper trim cover (2) from the steering column.
Trim Covers, Shift Lever Seal - Disassemble - Off Vehicle Floor Shift
Tools Required
•
J 41352
Modular Column Holding Fixture
•
J 42640
Steering Column Anti Rotation Pin
Remove the tilt lever.
Important:
Place the steering column in the CENTER position.
Put the steering column and
J 41352
into a vise.
Insert
J 42640
into the lower trim cover of the steering column.
Inspect the steering column for accident damage. Refer to
Inflatable Restraint Coil Centering - Off Vehicle
.
Remove the 2 pan head tapping screws (1) from the lower trim cover (2).
Remove the lower trim cover from the upper trim cover.
Tilt the lower trim cover down.
Slide the lower trim cover backward in order to disengage the locking tabs.
Remove the 2 TORX® head screws (1) from the upper trim cover (2).
Remove the upper trim cover (2) from the steering column.