- Using a 30-32 mm (1 3/16 inch)
deep well socket or box end wrench, depress the four tabs on internal wiring harness
connector (1). With the tabs depressed, gently pop the connector into and through
main housing (2) with the palm of the hand.
- Disconnect internal wiring
harness (2) from the following components:
• | C ON/OFF shift solenoid (7). |
• | E ON/OFF shift solenoid (5) |
• | D ON/OFF shift solenoid (4) |
• | Pressure switch assembly (9) |
- Remove solenoid retainers (1) from solenoids (4) and (5).
- Remove internal wiring harness (2) from main valve body (10).
- Install solenoid retainers (1).