SELECTIVE WASHER/NEW DESIGN 200C,2004R,325-4L TRANS.

Models: 1982-1983 Light Duty With THM 200C Automatic Transmission

This bulletin is to revi divisional bulletin 83-B-106. The correct date for implementation of the new design selective washer was June 17, 1983 for the following parts and transmission models:

Turbine shaft to Output Shaft - THM 200C

Refer to divisional bulletin 83-B-106 for selective size and part number information.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.