BENCH SEAT ARMREST REMOVAL PROCEDURE OUTLINED

VEHICLES AFFECTED: 1985-87 M VANS

The following procedure should be foLlowed to remove the armrest from bucket and bench seats on 1985-87 M Vans.

Removal

Place armrest in the vertical position. Grasp armrest at top and bottom. Push armrest toward seat back and rotate armrest rearward 10 15 degrees. Pull armrest away from seat.

Installation

Reverse removal procedure.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.