SHIFT LEVER RATTLE ON STEERING COLUMN-INST. REDESIGNED LEVER

SUBJECT: SHIFT LEVER RATTLES ON STEERING COLUMN (INSTALL REDESIGNED SHIFT LEVER)

MODELS: 1990-92 M/L VANS WITH 4-SPEED AUTOMATIC TRANSMISSION (RPO MXO)

Some owners of 1990-92 M/L vans with a four speed automatic transmission (RPO MXO) may comment about the shift lever on the steering column rattling and/or having greater than desired movement while driving.

The rattling condition and/or additional movement in the shift lever may be caused by the bushing not fitting correctly in the shift lever hole where the retaining pin goes through the assembly on the steering column.

This condition may be corrected by replacing the current shift lever assembly with a redesigned shift lever (P/N 15692370 without tilt wheel or P/N 15692371 with tilt wheel) which has a new style bushing in it.

SERVICE PROCEDURE

1. Remove the pivot pin (Figure 1, "30") from the bowl assembly.

2. Remove the shift lever (Figure 1, "23") from the bowl assembly. Be careful not to lose spring (Figure 1, "31"), or bushing (Figure 1, "29").

3. Install the redesigned shift lever (P/N 15692370 without tilt wheel or P/N 15692371 with tilt wheel) (Figure 1, "23") on the steering column.

4. Install the pivot pin (Figure 1, "30").

5. Check all positions for positive engagement of the shift gate.

SERVICE PARTS INFORMATION

Part Number Description ------ ----------- 15692370 Shift Lever WITHOUT Tilt Wheel 15692371 Shift Lever WITH Tilt Wheel (RPO N33 or 9J6)

Parts are available. In case of limited inventory, parts will be placed on 400 control to waive VIP surcharges. Only verifiable emergency orders will be accepted. GMSPO will make every effort to obtain parts. However, the part will be shipped premium transportation at the dealer's expense and all other order types will be placed on backorder until the 400 control is removed.

WARRANTY INFORMATION

For vehicles repaired under warranty use: Labor Operation: K5120 Labor Time: 0.2 hrs.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.