SEAT BELT TEMPORARILY INOP AFTER EXTENDED CHILD SEAT USE

SUBJECT: SEAT BELT TEMPORARILY INOPERATIVE AFTER EXTENDED CHILD SEAT USAGE (NEW SEAT BELT ASSEMBLY)

VEHICLES AFFECTED: 1989-90 L/M VAN W/BENCH SEATS

Some 1989-1990 M/L van owners may experience, on a temporary basis, the inability to pull out (extend) the right hand intermediate seat lap belt after the seat belt is used to retain a child seat for an extended period of time without periodically cycling (retracting and extending) the belt.

To prevent this condition from recurring, it is necessary to replace the seat belt assembly with an internally modified (shortened pendulum nib height) belt assembly. There is no visual difference between the existing and revised seat belt assembly. Part numbers have been changed to identify the revised assemblies.

REPLACEMENT PROCEDURE: Refer to Figure 1 ----------------------------------------- NOTE: The following instructions apply only to the RIGHT outer side of bench seat.

1. Remove nut (1) and disconnect the retractor assembly (2) from the support bracket (3,) and remove seat belt from seat.

2. From the list of part numbers below, use the applicable part and install new seat belt assembly (retractor assembly) to the support bracket nut (1 and 2). Tighten the nut to 53 N.m (39 ft.lbs.).

SERVICE PARTS INFORMATION

New Replaces Description- Part Part Intermediate Bench Number Number Seat Belt Asm. -------- -------- ------------- 15637020 15617858 Dk. Cognac 15637016 15617855 Dk. Blue 15637022 15617857 Med. Dk. Gray 15637018 15633770 Dk. Red

Use the most applicable Labour Operation and Time from the Canadian Labour Time Guide.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.