Removal Procedure
- Disconnect the coolant recovery reservoir hose from the from the radiator
filler neck.
- Remove the two reservoir retainers.
- Disconnect the electrical connectors from the washer pumps.
- Disconnect the washer hose(s) from the washer pump(s).
- Remove the coolant recovery reservoir/windshield washer assembly.
- Pour out the coolant in the reservoir. Clean the reservoir assembly.
Installation Procedure
- Connect the electrical connector(s) to
the washer pump(s).
- Connect the washer hose(s) to the washer pump(s).
- Install the coolant recovery reservoir.
- Install the retainers.
- Install the coolant recovery reservoir hose.
- Refill the coolant recovery reservoir with coolant to the proper
level. Refer to
Cooling System Draining and Filling
.