SMU-SECTION 3A - FRONT WHEEL ALIGNMENT - REVISED

SUBJECT: SERVICE MANUAL UPDATE - SECTION 3A - FRONT WHEEL ALIGNMENT - REVISED AXLE ALIGNMENT SPECIFICATIONS FOR CAMBER

MODELS: 1997 CHEVROLET AND GMC MEDIUM DUTY C-SERIES, B7 CHASSIS AND T-SERIES TRUCKS

THIS BULLETIN IS BEING ISSUED TO REVISE "AXLE ALIGNMENT SPECIFICATIONS" ON PAGE 3A-7 IN THE 1997 T SERIES MEDIUM DUTY TRUCK SERVICE MANUAL BOOK 1 OF 2 AND THE 1997 MEDIUM DUTY TRUCK C-SERIES AND B7 CHASSIS SERVICE MANUAL BOOK 1 OF 2.

FIGURES:00 ATTACHMENTS:02

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1997 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.