SMU - SEC. 6E - ENG. CONTROLS REV. DTC P1441 EVAP

SUBJECT: SERVICE MANUAL UPDATE - SECTION 6E - ENGINE CONTROLS REVISED DTC P1441 EVAP SYSTEM FLOW DURING NON-PURGE

MODELS: 1997 CHEVROLET AND GMC M/L MODELS WITH 4.3L ENGINE (VIN W - RPO L35)

ATTACH THE REVISED DTC P1441 PROCEDURE TO THE FOLLOWING MODEL YEAR SERVICE MANUAL:

1997 M/L VAN BOOK 2, PAGES 6E-295 - 6E-298

FIGURES: 00 ATTACHMENTS: 04

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1998 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.