Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Heater Blower Controls System Check? | -- | Go to Step 2 | |
2 |
Did the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Inspect for a poor connection at the rear A/C resistor pack. Does a poor connection exist? | -- | Go to Step 9 | Go to Step 5 |
4 | Use a test lamp J 35616-200 in order to backprobe from the rear A/C switch CKT 1176 (YEL) cavity F to ground. Did the test lamp light? | -- | Go to Step 6 | Go to Step 7 |
5 | Replace the rear A/C resistor pack. Refer to Auxiliary Blower Motor Resistor Replacement . Is the repair complete? | -- | -- | |
6 | Repair the open in CKT 1176 (YEL) between the rear A/C switch and the rear A/C resistor pack. Is the repair complete? | -- | -- | |
7 | Inspect for a poor connection at the rear A/C switch. Did you find a poor connection? | -- | Go to Step 9 | Go to Step 08 |
8 | Replace the rear A/C switch. Refer to Accessory Switch Replacement . Is the repair complete? | -- | -- | |
9 | Repair the poor connection. Is the repair complete? | -- | -- |
