GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the door trim panel. Refer to Door Trim Panel Replacement in Doors.

  2. Object Number: 306854  Size: SH
  3. Remove the mounting screws.
  4. Remove the speaker from the door.

  5. Disconnect the eletrical connector from the speaker.

Installation Procedure


    Object Number: 306854  Size: SH
  1. Connect the electrical connector to the speaker.
  2. Install the speaker to the door.
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the speaker mounting screws.
  5. Tighten
    Tighten the speaker mounting screws to 2 N·m (18 lb in).

  6. Verify component operation.
  7. Install the door trim panel. Refer to Door Trim Panel Replacement in Doors.