Removal Procedure
- Open the transmitter case
as follows:
1.1. | Insert a dime between the 2 halves of the transmitter case at
the slot provided near the key ring hole. |
- Remove the battery from the transmitter case.
Installation Procedure
- Install the battery to the transmitter case with the positive (+) side
down.
Use a Panasonic® 3 volt CR3032, or an equivalent battery.
- Close the transmitter case by aligning the 2 sides of the case
and snapping the case together.
- Resynchronize the transmitter. Refer to
Transmitter Synchronization
.
- Verify that the system operates properly.