Did the Power Window System Check bring you here?

--

Go to Step 2

Go to Power Windows System Check

1. Disconnect the left front power window motor.
2. Place the ignition switch in the RUN position.
3. Connect a test lampJ 35616-200 from CKT 164 (DK BLU) cavity A at the left front power window motor connector to ground.
4. Press the left front power window master switch in the UP position.

Did the test lamp light?

--

Go to Step 3

Go to Step 4

1. Connect a test lampJ 35616-200 from CKT 164 (DK BLU) cavity A to CKT 165 (BRN) cavity B at the left front power window motor.
2. Press the left front power window master switch in the UP position.

Did the test lamp light?

--

Go to Step 5

Go to Step 6

Inspect for an open between CKT 164 (DK BLU) between the left front power window motor and the left front power window master switch.

Is there an open?

--

Go to Step 8

Go to Step 7

Replace the left front power window motor. Refer to Power Window Motor Replacement .

Is the repair complete?

--

Go to Power Windows System Check

--

Inspect for an open in CKT 165 (BRN) between the left front power window motor and the left front power window master switch.

Is there an open?

--

Go to Step 9

Go to Step 7

Replace the left front power window master switch. Refer to Power Accessory Switch Panel Replacement .

Is the repair complete?

--

Go to Power Windows System Check

--

Repair the open in CKT 164 (DK BLU) between the left front power window motor and the left front power window master switch.

Is the repair complete?

--

Go to Power Windows System Check

--

Repair the open in CKT 165 (BRN) between the left front power window motor and the left front power window master switch.

Is the repair complete?

--

Go to Power Windows System Check

--