GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 Safari - 2WD 🢒 Body and Accessories 🢒 Doors 🢒 Window Channel Replacement

Removal Procedure
  1. Roll the window up completely.
  2. Remove the trim panel. Refer to Door Trim Panel Replacement .
  3. Use a sharp bladed tool, if needed, in order to separate the water deflector at the perforations. Refer to Front Side Door Water Deflector Replacement .
  4. Remove the door to window run channel bolt.

    5. Object Number: 324136 Size: SH
  5. Pull the run channel away from the upper channel (which is part of the door) in order to remove the window run channel from the door.

Installation Procedure

    Object Number: 324136 Size: SH
  1. Slide the clip of the channel into the upper channel in order to install the window run channel to the door.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the door to window run channel bolt.

    3. Tighten
    Tighten the bolt to 9.5 N·m (84 lb in).

  3. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Install the trim panel. Refer to Door Trim Panel Replacement .