GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the trim panel. Refer to Door Trim Panel Replacement .
  2. Use a sharp bladed tool in order to separate the water deflector at the perforations. Refer to Front Side Door Water Deflector Replacement .

  3. Object Number: 323617  Size: SH
  4. Remove the lock rods from the front door lock.
  5. Remove the front door lock screws.

  6. Object Number: 324132  Size: SH
  7. Remove the front door lock from the door.

Installation Procedure


    Object Number: 324132  Size: SH
  1. Install the lock to the door.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 323617  Size: SH
  3. Install the lock screws.
  4. Tighten
    Tighten the screws to 7 N·m (62 lb in).

    Important: Install new plastic retainer clips whenever the lock rods are removed.

  5. Install the lock rods to the front door lock.
  6. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  7. Install the trim panel. Refer to Door Trim Panel Replacement .