Disassembly Procedure
- Remove the lock module assembly. Refer to
Electronic Column Lock Module - Disassemble - Off Vehicle
.
- Remove the turn signal and multifunction switch assembly. Refer
to
Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle
.
- Remove the automatic transmission
shift lock control actuator.
- Use a screwdriver to pry the electrical automatic transmission
shift lock control actuator from the steering column jacket assembly.
- Remove the 3 flat head
6-lobed socket tapping screws (2).
- Remove the park lock cable assembly (3).
- Remove the gearshift lever assembly support bracket (1).
- Remove the steering column
seal (3).
- Remove the EVO sensor
assembly from the end of the steering shaft assembly.
- Remove the adapter and bearing assembly (2).
- Remove the lower steering shaft (1).