Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the DLC System Check performed? | -- | Go to Step 2 | |
2 |
Inspect with known good male terminal from J-38125 repair kit. Is the connection good? | -- | Go to Step 3 | Go to Step 5 |
3 | Using a DMM J 39200 ,measure voltage from terminal 16 of the DLC to ground. Is the voltage within the specified value? | 9.0 to 16.0 v | Go to Step 4 | Go to Step 7 |
4 | Using a DMM J 39200 ,measure the resistance from terminal 4 of the DLC to ground. Is the resistance within the specified value? | 0-5 ohms | Go to Step 6 | Go to Step 8 |
5 | Repair the connection as needed. Is the repair complete? | -- | Go to Step 2 | |
6 | Inspect the scan tool for a malfunction. Refer to the Scan Tool instruction manual. Has a properly operating scan tool been obtained? | -- | Go to Step 1 | -- |
7 | Repair an open in CKT 840 (ORN). Is the repair complete? | -- | -- | |
8 | Repair open in CKT 750. Is the repair complete? | -- | -- |
