1. Mark the position of the wiper blade on the windshield with a suitable marker or a piece of masking tape.
2. Lift the wiper blade from the windshield and disengage the retaining latch with a screwdriver.



3. Remove the wiper arm from the transmission drive shaft.
4. Disconnect the washer hose.

1. Connect the washer hose.
2. Position the wiper arm so that the wiper blade aligns with the mark made on the windshield before removal.



3. Install the wiper arm onto the drive shaft.
4. Press in the retaining latch.

Run the wipers and check for proper operation.