GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 29714-A Servo Cover Depressor


    Object Number: 5426  Size: SH
  1. Install the J 29714-A .

  2. Object Number: 5427  Size: SH

    Important: If cover does not move inwards with tool, use a block of wood or suitable material and lightly tap on cover using a hammer to free up cover in bore.

  3. Tighten the J 29714-A bolt to compress the servo cover.

  4. Object Number: 207613  Size: SH
  5. Remove the servo cover retaining ring (29) and the J 29714-A .

  6. Object Number: 207615  Size: SH
  7. Remove the servo cover (28) and O-ring seal (27). If the servo cover seems to be hung up on the seal, cut and remove the O-ring seal before removing the cover.
  8. Remove the 2-4 servo assembly.