Removal Procedure
- Raise the vehicle to a suitable height.
- Remove the assist step pad nuts.
- Remove the assist step pad as follows:
| 3.1. | Insert a plastic tool along the edge. |
| 3.2. | Pull upward on the assist step pad until it is fully released from the
assist step plate. |
Installation Procedure
- Install the assist step pad as follows:
| 1.1. | Align the assist step pad to the assist step plate and press downward
firmly until seated. |
| 1.2. | The assist step pad nuts are to be hand torque. |
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the assist step pad nuts
Tighten
Tighten the assist step pads nuts to 8 N·m (71 lb in).
- Lower the vehicle.
