- Lubricate the tilt spring (2)
with synthetic grease.
- Install the spring guide (1) into the tilt spring (2).
Caution: The tilt spring and the spring guide are under pressure. The tilt spring
and the spring guide may become a projectile. Secure the spring with locking
pliers during removal. Secure the spring with locking pliers during installation.
Bodily injury may result during removal and installation of the tilt spring
and the spring guide. Always use caution during removal and installation of
the tilt spring and the spring guide.
- Install the tilt spring (1).
3.1. | Install the tilt spring (1) to the post on the steering
column support assembly (2). |
3.2. | Secure the tilt spring (1) with locking pliers. |
- Install the upper and lower trim covers. Refer to
Steering Column Trim Covers - Assemble - Off Vehicle
.
- Enable the inflatable restraint steering wheel module. Refer to
Enabling the SIR System
in SIR.