GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the left rear bucket seat. Refer to Bucket Seat Replacement in Seats.

  2. Object Number: 162196  Size: SH
  3. Remove the seat belt bolt from the rear floor.
  4. Remove the body side trim panel. Refer to Body Side Trim Panel Replacement - Left Side in Interior Trim.

  5. Object Number: 162125  Size: SH
  6. Remove the cover from the shoulder belt to expose the bolt.
  7. Remove the shoulder belt retaining bolt from the body side pillar.
  8. Remove the retractor bolt from the body side panel.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 162125  Size: SH
  1. Install the retractor bolt to the body side panel.
  2. Tighten
    Tighten the retractor bolt to 53 N·m (39 lb ft).

  3. Install the shoulder belt bolt to the body side pillar.
  4. Tighten
    Tighten the shoulder belt bolt to the body side pillar to 30 N·m (22 lb ft).

  5. Install the cover to the shoulder belt.
  6. Install the body side trim panel. Refer to Body Side Trim Panel Replacement - Left Side in Interior Trim.

  7. Object Number: 162196  Size: SH
  8. Install the seat belt bolt to the rear floor.
  9. Tighten
    Tighten the seat belt bolt to the rear floor to 53 N·m (39 lb ft).

  10. Install the left rear bucket seat. Refer to Bucket Seat Replacement in Seats.