Removal Procedure
- Remove the door trim panel. Refer to
Door Trim Panel Replacement
in Doors.
- Remove the mounting screws.
- Remove the speaker from the door.
- Disconnect the electrical connector from the speaker.
Installation Procedure
- Connect the electrical
connector to the speaker.
- Install the speaker to the door.
Notice: Refer to Fastener Notice in the Preface section.
- Install the speaker mounting screws.
Tighten
Tighten the speaker mounting screws to 2 N·m (18 lb in).
- Verify component operation.
- Install the door trim panel. Refer to
Door Trim Panel Replacement
in Doors.