GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Safari - 2WD 🢒 Body and Accessories 🢒 Frame and Underbody 🢒 Frame Stop Replacement

Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 316214 Size: SH
  2. Remove the bolts that retain the frame stop to the frame.
  3. Remove the frame stop.

Installation Procedure

    Object Number: 316214 Size: SH
  1. Install the frame stop.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts that retain the frame stop to the frame.

    3. Tighten
    Tighten the bolts that retain the frame stop to 35 N·m (26 lb ft).

  3. Lower the vehicle.