GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform the HVAC Blower Controls System Check?

--

Go to Step 2

Go to HVAC Blower Controls System Check

2

  1. Place the ignition switch in the RUN position.
  2. Place the rear air conditioning (A/C) switch in the HIGH position.
  3. Use a test lamp J 35616-200 in order to backprobe from the rear A/C switch CKT 1052 (ORN) cavity A to ground.

Did the test lamp light?

--

Go to Step 3

Go to Step 4

3

Repair the open in CKT 1052 (ORN) between the rear A/C switch and the rear A/C resistor pack.

Is the repair complete?

--

Go to Heater Blower Controls System Check

--

4

Inspect for a poor connection at the rear A/C switch.

Did you find a poor connection?

--

Go to Step 5

Go to Step 6

5

Repair the poor connection.

Is the repair complete?

--

Go to Heater Blower Controls System Check

--

6

Replace the rear A/C switch. Refer to Accessory Switch Replacement .

Is the repair complete?

--

Go to Heater Blower Controls System Check

--