Removal Procedure
- Remove the instrument panel extension trim plate. Refer to
Instrument Panel Extension Trim Plate Replacement
in Instrument Panel, Gauges and Console.
- Squeeze the fasteners on both sides of the remote compact disc
player.
- Pull out the remote compact
disc player.
- Disconnect the electrical connectors.
Installation Procedure
- Connect the electrical connectors.
- Align the fasteners on
the remote compact disc player with the slots in the instrument panel extension.
- Slide the remote compact disc player into place until the fasteners
are fully seated.
- Install the instrument panel extension trim plate. Refer to
Instrument Panel Extension Trim Plate Replacement
in Instrument Panel, Gauges and Console.