The temperature and compass display module can perform the self diagnostic test in order to display segments and internal circuitry. Refer to the Self Diagnostic Chart in order to initiate and interpret the self diagnostic capabilities.
Step | Action | Normal Result(s) | Abnormal Result(s)* | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Perform the self-diagnostic tests on the driver information display. Refer to Driver Information System Self Diagnosis for the procedure. | The display segments light for 2 seconds, then turn off for 2 seconds. | |||||||||||||
2 |
|
| |||||||||||||
3 | Toggle the display MODE button to the trip computer functions. | The driver information display shows one of the following functions:
| |||||||||||||
4 | Turn ON the park lamps. | The display dims | Driver Information Center (DIC) Temperature Display Inoperative | ||||||||||||
5 | Adjust the dimmer switch for the headlamp and instrument panel lamp assembly. | The driver information display brightness varies while you adjust the headlamp and instrument lamp dimmer switch. | Driver Information Center (DIC) Temperature Display Inoperative | ||||||||||||
6 |
|
| |||||||||||||
7 | Press the ENGLISH/METRIC switch. | The display units change from English to Metric. | |||||||||||||
8 | Turn OFF the ignition switch, then turn ON the ignition switch. | The display retains the last request mode before turning off the ignition. | |||||||||||||
* Refer to the appropriate symptom diagnostic table for the applicable abnormal result. | |||||||||||||||
