GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 Safari - 4WD 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Center Track Cover Replacement

Removal Procedure
  1. Remove the taillamp. Refer to Tail Lamp Replacement in Lighting Systems.
  2. Remove the body side trim panel. Refer to the appropriate procedure in Interior Trim:
    3. •  Body Side Trim Panel Replacement - Left Side
    •  Body Side Trim Panel Replacement - Right Side
  3. Remove the track cover nut.
  4. Remove the track cover bolts.

    5. Object Number: 324155 Size: SH
  5. Remove the track cover.

Installation Procedure

    Object Number: 324155 Size: SH
  1. Install the track cover.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the track cover nut.

    3. Tighten
    Tighten the track cover nut to 10 N·m (86 lb in).

  3. Install the track cover bolts.

    4. Tighten
    Tighten the track cover bolts to 10 N·m (86 lb in).

  4. Install the taillamp.