GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 Safari - 4WD 🢒 Body and Accessories 🢒 Seats 🢒 Seat Belt Retractor Replacement - No. 3 Right Rear

Removal Procedure

    Object Number: 314687 Size: SH
  1. Remove the jack storage access door.
  2. Remove the storage tray. Squeeze the storage tray from underneath. This will expose the retractor bolt.

    3. Object Number: 162233 Size: SH
  3. Remove the retractor retaining bolt.

    4. Object Number: 162223 Size: SH
  4. Remove the shoulder belt cover to expose the bolt.
  5. Remove the shoulder belt retaining bolt from the bracket.
  6. Remove the retractor from the vehicle.

Installation Procedure

    Object Number: 162223 Size: SH
  1. Install the retractor to the vehicle.

    2. Object Number: 162233 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolt retaining the shoulder belt to the bracket.

    3. Tighten
    Tighten the bolt retaining the shoulder belt to the bracket to 30 N·m (22 lb ft).

  3. Install the shoulder belt cover.
  4. Install the retractor retaining bolt.

    5. Tighten
    Tighten the retractor retaining bolt to 53 N·m (39 lb ft).

  5. Install the storage tray. Squeeze the storage tray together. Press the storage tray into place.

    6. Object Number: 314687 Size: SH
  6. Install the jack storage access door.